LUNA Q PREMIUM PLCL SUTURE

LUNA Q PREMIUM PLCL SUTURE

LUNA Q PREMIUM PLCL SUTURE - PLCL TENSIONING THREAD LIFT: AN EMBELLISHMENT THERAPY.
STRICT MEDICAL USE. Also requires a good installation expertise on the part of the doctor who uses it.
The PLCL used to manufacture Luna Q is FDA approved and can be produced in various forms like: COG B, MOLD B, COG NOSE, MONO, SCREW and TWIN COG.
PLCL is an excellent bio-degrabable material which stimulates the production of collagen allowing a re-tensioning of the skin (skin tightening).
TENSIONING THREADS make it possible to TURN BACK TIME with EXCELLENT RESULTS
The intrinsic flexibility of the PLCL (two-component) wire guarantees a better quality of the notches, which gives it greater efficiency. PLCL has the advantages of PLLA and Poly-Caprolactone in terms of safety and durability.

LUNA Q PLCL

  • Substances used: PLLA and Poly-caprolactone.
  • Duration of the procedure: 20 to 30 minutes.
  • Benefits: The effect increases over time.
  • Characteristics: Lifting effect Self-generation of collagen +++.
  • Durability: 12 to 18 months.
  • Efficiency: More efficient notches better grip.

1/ TWIN MOLD.
2/ MOLD B.
3/ TWIN COG B.
4/ COG B.
5/ MULTI.
6/ COG NOZE.
7/ MONO.
8/ SCREW.

1/ TWIN MOLD

  • THE TWIN WIRE Mold is a 300 or 340mm notched and bidirectional wire mounted on 2 foam needles of 19G in opposite directions.
  • This wire is primarily intended for the treatment of the oval (wire size +2) because of its pulling power, its significant length and its resistance to elongation.
  • MOLD notches offer maximum grip and are less aggressive than conventional notches. This allows him to advise him mainly for the management of the oval because this wire will generate less postoperative pain in the temporal area.
  • The presence of 2 foam needles makes it possible to manage the neck area with efficiency and safety.
  • It is therefore intended for faces with an oval showing significant sagging.

2 / MOLD B

  • The FIL MOLD is available in 2 sizes mounted on 18G 60mm or 100mm long “L cannula” cannulas.
  • The wire diameter is one size +2.
  • The intrinsic features of this wire are the presence of molded notches allowing maximum grip and a USP +2 diameter for increased resistance. This thread is reserved for the oval of the face mainly for faces with thick skin or with significant sagging.
  • It is also a suitable thread for temporal hooks.
  • We obviously find the same manufacturing characteristics of the cannulas as those of COG B.

3 / TWIN COG B

  • THE TWIN COG WIRE is a 340mm notched and bidirectional wire mounted on 2 foam needles of 19G in opposite directions.
  • This thread is mainly intended for the treatment of cervical sagging (Thread size 0-0 or +1).
  • This wire is very powerful: this results from its long length, its high grip zone, its low tensile zone and also its resistance to elongation.
  • The presence of 2 foam needles makes it possible to manage the neck area with efficiency and safety.

4 / COG B

  • THE LUNA Q COG B WIRE is a 120 to 180mm long monodirectional notched PLCL wire, mounted in a 19G "L cannula" 38 to 100mm long cannula.
  • The wire diameter is one size 0-0.
  • These threads are used for medical facelifting.
  • The different lengths available allow the appropriate treatment of areas such as the oval (100mm), the eyebrows or browlift (38 or 60mm) and the mandibular angle (60mm). The cannulas are "L cannula" which combine safety and ease of insertion. Laser cutting of the end ensures that the integrity of the wire is respected during insertion.
  • In the case of "heliodermal" skin, it is advisable to use a COG B wire mounted on a 21G cannula (finer diameter wire 3-0).

5 / MULTI

  • MULTI THREAD is a 38mm poly-filament thread (7 PLCL filaments per needle) mounted on a 23G needle.
  • It is used to treat depressed and wrinkled areas of the face and décolleté.

6 / COG NOZE

  • The PLCL COG NOZE wire is a notched wire mounted on a cannula of the "L cannula" type,
  • one size +2 which gives it great strength.
  • It allows, thanks to the 2 existing lengths, to work:
  • - On the one hand on the shortening of the nasal columella with the size 19GX38 mm - On the other hand on the shortening of the nasal dorsum with the size 19GX60 mm.

7 / MONO

  • MONO THREAD is a smooth PLCL thread mounted on a 38 or 60mm needle.
  • This PLCL thread is used to treat large areas of the skin by stimulating the synthesis of collagen in the skin.
  • This thread, laid in a grid and in number, is used to treat fine lines on the face, neck, body (arms, thighs, abdomen, etc.) and neckline mainly.

8 / SCREW

  • The SCREW THREAD is a coiled PLCL thread mounted on a 55 or 60mm needle.
  • Its spiral shape makes it possible to concentrate on a small area of ​​the face or body a large amount of PLCL, a resorbable material that stimulates collagen.